ZANKER TD4213 User Manual download pdf (Page 11)

ENGLISH

If necessary the filters can be cleaned under running

water using a brush. In this case remove the filter in

the door opening as per picture (it can be positioned

with the tooth facing to the left or to the right).

P1112

Something not working?

If, after the above checks, there is still a fault, call

your local Zanussi Service Centre.

Please make sure you give the model and serial

number of the appliance.

This information can be found on the rating plate

(see picture on page 4).

Before contacting your local Zanussi Service Centre, please make the following checks:

Problem Possible cause

• The dryer does not work:

• The door is open.

• The plug is not fitted into the wall socket.

• There is no electricity supply from the wall socket.

• The selector dial is not set correctly.

• The start button has not been depressed.

• The dryer does not dry properly:

• The filters are clogged.

• Insufficient drying time.

• The selected cycle is not suitable for the laundry.

• The laundry has not been spun properly.

• The low temperature function has been

selected.

• Excessive laundry load.

• The dryer is not correctly installed.

125993070.qxd 3/1/02 10:22 AM Pagina 11 (Nero/Process Black pellicola)

1 2 ... 6 7 8 9 10 11 12

No comments

ZANKER TD4213 User Manual Page 11