ZANKER KDI10002XK User Manual

KDI10002XKUser ManualENDishwasher

Cleaning the filtersBAC• Make sure that there are no residues of food or soil in or around the edge of the sump.• Put back in place the flat filter (C

Problem and alarm code Possible cause and solutionYou cannot activate the appliance.• Make sure that the mains plug is connected to the mainssocket.•

The washing and drying results are not satisfactoryProblem Possible cause and solutionPoor washing results.• Refer to "Daily use", "Hin

Refer to "Before first use", "Daily use"or "Hints and tips" for other possiblecauses.Technical informationDimensions Wid

14

15

www.electrolux.com/shop100011680-A-182015

ContentsSafety information 2Safety instructions 3Control panel 4Programmes 5Settings 5Before first use 6Daily use7Hints and tips 8Care and cleaning 9T

• If the supply cord is damaged, it must be replaced by the manufacturer, itsAuthorised Service Centre or similarly qualified persons in order to avoi

Use• Do not sit or stand on the open door.• Dishwasher detergents are dangerous. Obey thesafety instructions on the detergent packaging.• Do not drink

ProgrammesProgramme Degree of soilType of loadProgramme phases Consumption values1)Duration(min)Energy(kWh)Water(l) 2)Normal soilCrockery and cut-lery

The water hardness tableGerman degrees(°dH)French degrees(°fH)mmol/l Clarke degrees Water softener lev-el47 -50 84 - 90 8.4 - 9.0 58 - 63 1043 - 46 76

Adding saltBefore first use put one litre of water in the salt container.Water and salt can come out from the salt container when you fill it. Risk of

Adding multi-tablets212030• Do not fill the salt container and the rinse aid dispenser.• Adjust the water softener to the lowest level.• Set the rinse

The water softenerThe water softener removes minerals from the watersupply, which would have a detrimental effect on thewashing results and on the app