ZANKER KIT8470XXK User Manual download pdf (Page 7)

Residual heat indicator

Warning! There is a risk of burns

from residual heat. The indicators show

the level of the residual heat for the

cooking zones you are currently using.

The indicators may also come on for the

neighbouring cooking zones even if you

are not using them.

The induction cooking zones produce the heat

necessary for the cooking process directly in the bottom

of the cookware. The glass ceramic is heated by the

heat of the cookware.

Daily use

Warning! Refer to Safety chapters.

Activating and deactivating

Touch for 1 second to activate or deactivate the

hob.

Automatic Switch Off

The function deactivates the hob automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after you activate the

hob,

• you spill something or put something on the control

panel for more than 10 seconds (a pan, a cloth,

etc.). An acoustic signal sounds and the hob

deactivates. Remove the object or clean the control

panel.

• the hob gets too hot (e.g. when a saucepan boils

dry). Let the cooking zone cool down before you use

the hob again.

• you use incorrect cookware. The symbol comes

on and the cooking zone deactivates automatically

after 2 minutes.

• you do not deactivate a cooking zone or change the

heat setting. After some time comes on and the

hob deactivates.

The relation between the heat setting and the time

after which the hob deactivates:

Heat setting The hob deactivates af-

ter

, 1 - 2

6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hour

The heat setting

To set or change the heat setting:

Touch the control bar at the correct heat setting or move

your finger along the control bar until you reach the

correct heat setting.

Automatic Heat Up

Activate this function to get a desired heat setting in a

shorter time. When it is on, the zone operates on the

highest setting in the beginning and then continues to

cook at the desired heating setting.

To activate the function the cooking zone

must be cold.

To activate the function for a cooking zone: touch

( comes on). Immediately touch a desired heat

setting. After 3 seconds comes on.

To deactivate the function: change the heat setting.

PowerBoost

This function makes more power available to the

induction cooking zones. The function can be activated

for the induction cooking zone only for a limited period

of time. After this time the induction cooking zone

automatically sets back to the highest heat setting.

Refer to “Technical data” chapter.

To activate the function for a cooking zone: touch

. comes on.

To deactivate the function: change the heat setting.

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Comments to this Manuals

No comments

ZANKER KIT8470XXK User Manual Page 7

Comments to this Manuals

Related products and manuals for Hobs ZANKER KIT8470XXK