ZANKER KOU10311XB User Manual download pdf (Page 12)

Replacing the lamp

Put a cloth on the bottom of the interior of the appliance.

It prevents damage to the lamp glass cover and the

cavity.

Warning! Danger of electrocution!

Disconnect the fuse before you replace

the lamp.

The lamp and the lamp glass cover can

be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or deactivate

the circuit breaker.

The back lamp

1. Turn the lamp glass cover counterclockwise to

remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300 °C heat-

resistant lamp.

4. Install the glass cover.

Troubleshooting

Warning! Refer to Safety chapters.

What to do if...

Problem Possible cause Remedy

The cooking zones do not operate. Refer to the operating instructions for the built-in cooking surface.

The oven does not heat up. The oven is deactivated. Activate the oven.

The oven does not heat up. The fuse is blown. Make sure that the fuse is the cause

of the malfunction. If the fuse is

blown again and again, contact a

qualified electrician.

The lamp does not operate. The lamp is defective. Replace the lamp.

Steam and condensation settle on

the food and in the cavity of the

oven.

You left the dish in the oven for too

long.

Do not leave the dishes in the oven

for longer than 15 - 20 minutes after

the cooking process ends.

Service data

If you cannot find a solution to the problem yourself,

contact your dealer or an Authorised Service Centre.

The necessary data for the service centre is on the

rating plate. The rating plate is on the front frame of the

appliance cavity. Do not remove the rating plate from

the appliance cavity.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Comments to this Manuals

No comments

ZANKER KOU10311XB User Manual Page 12

Comments to this Manuals

Related products and manuals for Hobs ZANKER KOU10311XB