ZANKER CF2276 User Manual download pdf (Page 4)

INSTALLATION

Unpacking

All transit bolts and packing must be removed before

using the machine.

You are advised to keep all packing for re-use in case

you move house and the machine has to be transpor-

ted again.

Proceed as follows:

Using a spanner remove

the screw on the right at

the rear of the machine.

Carefully lay the machi-

ne on its back making

sure that the hoses are

not squashed.

Place between machine

and bottom one of the

polystyrene angle pack-

ings.

Remove the polystyrene base and take off the bottom

panel by unscrewing the central screw.

Carefully remove the right polythene bag.

Carefully take off the central and left polythene bags.

Re-fit the bottom panel using the 4 screws supplied

with the hinges and the previously removed screw.

Set the machine upright and unscrew the two remain-

ing rear screws.

Slide out the 3 plastic spacers and plug the 3 holes

with the 3 plastic plugs which you can find on the

back of the machine.

Positioning

Position the machine on a firm level surface.

The machine must not touch the wall or other furni-

ture.

It is assumed that the tap, drainage point and socket

are within easy reach of the machine hoses and

power supply cable. If not, you are advised to call

your fitter in order to move the tap and/or drainage

point and/or socket.

Water inlet

Connect the water inlet hose to a tap with a

" gas

thread spout.

The inlet hose is provi-

ded with a water stop

device, which protects

against damage caused

by water leaks in the fill

hose which could deve-

lop due to natural ageing

of the hose. This fault is

shown by a red sector in

the window «A».

Should this occur, turn the water tap off and refer to

your Service Agent to replace the hose.

The other end of the inlet

hose connected to the

machine can be turned in

any direction. Simply loo-

sen the fitting, rotate the

hose and retighten.

The inlet hose must not

be extended. If it is too

short and you do not

wish to move the tap,

replace it completely with a longer high pressure hose

specifically designed to solve problems of this type.

P0255

P0457

P0015

P0016

P0453

P0256

P0023

P0020

P0271

P0021

1 2 3 4 5 6 7 8 9 ... 15 16

Comments to this Manuals

No comments

ZANKER CF2276 User Manual Page 4

Comments to this Manuals

Related products and manuals for Washing machines ZANKER CF2276