ZANKER KRT60W User Manual download pdf (Page 12)

Part 1 - INSTALLATION INSTRUCTIONS

2 - INSTALLATION INSTRUCTIONS

Some installation systems require the opening and removal of the metal grille panel.

2.1 - Instructions for opening and removing the metal grille panel

To open the grille panel, press inwardly on the two slider catches at each side of the

grille panel and the grille will pivot down. To remove the metal grille, pull forward on

the right hand side so that the hinge pin on the back of the grille will be released from

the slot in the side of the casing.

2.2 - Wall cabinet fixing

a) Predrilled wall cabinet: fix the hood onto the wall cabinet base panel using the four

screws 4.2 x 45 mm (supplied with the fixing kit). It is not necessary to open the

metal grille.

b) No predrilled wall cabinet:

b.1 - If the hood is provided with a paper fixing template, follow the instructions.

b.2 - If the hood is not provided with a paper fixing template, position the hood on the

wall cabinet base panel and pilot drill the 3.5 x 16 mm screws (not supplied with the

fixing kit) from the inside onto the wood.

2.3 - Wall mounting

a) Drill two Ø 8 mm holes on the wall using the paper template, insert two rawl plugs

and two 4.2 x 44,4 mm screws leaving 5 mm untightened. Open the metal grille

panel, hook the hood on and fully tighten the screws.

b) If the hood is not provided with a paper fixing template, drill two Ø 8 mm holes (see

draw.), insert the plugs and screws, proceeding as directed under paragraph a.

c) For wall mounting using wallbrackets (optional), follow the instructions of the fixing

template.

d) Pay attention to the safety regulation of point 1. 6 .

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

No comments

ZANKER KRT60W User Manual Page 12