ZANKER KWF71411WE User Manual download pdf (Page 27)

Malfunction Possible cause / Solution

The appliance vibrates

noisily:

The transit bolts and packing have not been removed.

• Check the correct installation of the appliance.

The appliance is not levelled correctly.

• Adjust the feet.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

Maybe there is very little laundry in the drum.

• Load more laundry.

Spinning starts late or the

appliance does not spin:

The electronic unbalance detection device has cut in because the laundry is not

evenly distributed in the drum. The laundry is redistributed by reverse rotation of

the drum. This may happen several times before the unbalance disappears and

normal spinning can resume. If, after 10 minutes, the laundry is still not evenly

distributed in the drum, the appliance will not spin. In this case, redistribute the

load manually and select the spin programme.

• Load more laundry.

The load is too small.

• Add more items, redistribute the load manually and then select the spinning

programme.

No water is visible in the

drum:

Appliances based on modern technology operate very economically using very lit-

tle water without affecting performance.

Unsatisfactory washing

results

Too little detergent or unsuitable detergent has been used.

• Increase the detergent quantity or use another one.

Stubborn stains have not been treated prior to washing.

• Use commercial products to treat the stubborn stains.

The correct temperature was not selected.

• Check if you have selected the correct temperature.

Excessive laundry load.

• Reduce the laundry load.

The appliance makes an

unusual noise

The appliance is fitted with a type of motor which makes an unusual noise com-

pared with other traditional motors. This new motor ensures a softer start and

more even distribution of the laundry in the drum when spinning, as well as in-

creased stability of the appliance.

After completing these checks, switch on the appliance

and press the button 9 to restart the programme.

If the malfunction shows again, contact your Service

Centre. The necessary data for the service centre is on

the rating plate. We recommend that you write the data

here:

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

ZANKER KWF71411WE User Manual Page 27

Comments to this Manuals

Related products and manuals for Washing machines ZANKER KWF71411WE