ZANKER KWF71411WE User Manual download pdf (Page 9)

Tie the plastic hose guide to the tap with a string to

prevent that the drain hose unhooks when the appli-

ance is emptying.

• Onto a sink outlet spigot.

Push the drain hose onto the spigot and secure with

a clip, ensure a loop is formed in the drain hose to

prevent waste from the sink entering the appliance.

If the outlet spigot has not been used before, remove

any blanking plug that may be in place.

• Directly into a drain pipe at a height of not less

than 60 cm and not more than 100 cm.

MAX 100cm

The end of the drain

hose must always be

ventilated, i.e. the inside

diameter of the drain pipe

must be larger than the

outside diameter of the

drain hose. The drain

hose must not be kinked.

• Directly to a built-in drain pipe in the room wall.

The drain hose may be extended to a maximum

of 4 metres. An additional drain hose and joining

piece is available from your Local Centre.

Connections overview

~max.400 cm

min. 60 cm

max. 100 cm

0.5 bar (0.05 MPa)

8 bar (0.8 MPa)

min.

60 cm

max.

100 cm

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

No comments

ZANKER KWF71411WE User Manual Page 9