ZANKER KDT10003FB User Manual download pdf (Page 12)

Troubleshooting

If the appliance does not start or it stops during

operation, before you contact an Authorised Service

Centre, check if you can solve the problem by yourself

with the help of the information in the table.

Warning! Repairs not properly done

may result in serious risk to the safety of

the user. Any repairs must be performed

by qualified personnel.

With some problems the end indicator flashes

intermittently indicating a malfunction.

The majority of problems that can occur can be

solved without the need to contact an Authorised

Service Centre.

Problem and alarm code Possible cause and solution

You cannot activate the appliance.

• Make sure that the mains plug is connected to the mains

socket.

• Make sure that there is no damaged fuse in the fuse box.

The programme does not start.

• Make sure that the appliance door is closed.

• The appliance has started the procedure to recharge the res-

in inside the water softener. The duration of the procedure is

approximately 5 minutes.

The appliance does not fill with water.

• The end indicator flashes 1 time intermittent-

ly.

• Acoustic signal sounds 1 time intermittently.

• Make sure that the water tap is open.

• Make sure that the pressure of the water supply is not too

low. For this information, contact your local water authority.

• Make sure that the water tap is not clogged.

• Make sure that the filter in the inlet hose is not clogged.

• Make sure that the inlet hose has no kinks or bends.

The appliance does not drain the water.

• The end indicator flashes 2 times intermit-

tently.

• Acoustic signal sounds 2 times intermittently.

• Make sure that the sink spigot is not clogged.

• Make sure that the drain hose has no kinks or bends.

The anti-flood device is on.

• The end indicator flashes 3 times intermit-

tently.

• Acoustic signal sounds 3 times intermittently.

• Close the water tap and contact an Authorised Service Cen-

tre.

The appliance stops and starts more times during

operation.

• It is normal. It provides optimal cleaning results and energy

savings.

Small leak from the appliance door.

• The appliance is not levelled. Loosen or tighten the adjusta-

ble feet (if applicable).

• The appliance door is not centred on the tub. Adjust the rear

foot (if applicable).

The appliance door is difficult to close.

• The appliance is not levelled. Loosen or tighten the adjusta-

ble feet (if applicable).

• Parts of the tableware are protruding from the baskets.

Rattling/knocking sounds from inside the appli-

ance.

• The tableware is not properly arranged in the baskets. Refer

to basket loading leaflet.

• Make sure that the spray arms can rotate freely.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

ZANKER KDT10003FB User Manual Page 12

Comments to this Manuals

Related products and manuals for Dishwashers ZANKER KDT10003FB