ZANKER KDT10003FB User Manual download pdf (Page 8)

Adding salt

Before the first use, put one litre of water in the salt container.

Caution! Water and salt can come out of the salt container during filling. To prevent corrosion, start a

programme immediately after filling the salt container.

Adding rinse aid

The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse

phase. Fill the rinse aid dispenser when the lens (A) is clear.

Daily use

1. Open the water tap.

2. Press the on/off button to activate the appliance.

Make sure that the appliance is in programme selection

mode.

• If the salt indicator is on, fill the salt container.

3. Load the baskets.

4. Add the detergent.

5. Set and start the correct programme for the type of

load and the degree of soil.

Adding detergent

If the programme has a prewash phase, put a small quantity of detergent also in compartment B.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

ZANKER KDT10003FB User Manual Page 8