ZANKER KEV6041FBB User Manual download pdf (Page 11)

• Never try to extinguish a fire with water, but switch off the appliance and

then cover flame e.g. with a lid or a fire blanket.

• Do not store items on the cooking surfaces.

• Metallic objects such as knives, forks, spoons and lids should not be

placed on the hob surface since they can get hot.

• Do not use a steam cleaner to clean the appliance.

• If the glass ceramic surface / glass surface is cracked, switch off the

appliance to avoid the possibility of electric shock.

• If the supply cord is damaged, it must be replaced by the manufacturer, an

authorized Service or similarly qualified persons in order to avoid a

hazard.

Safety instructions

Installation

Warning! Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Obey the installation instruction supplied with the

appliance.

• Keep the minimum distance from the other

appliances and units.

• Always be careful when you move the appliance

because it is heavy. Always wear safety gloves.

• Seal the cut surfaces with a sealant to prevent

moisture to cause swelling.

• Protect the bottom of the appliance from steam and

moisture.

• Do not install the appliance adjacent to a door or

under a window. This prevents hot cookware to fall

from the appliance when the door or the window is

opened.

• If the appliance is installed above drawers make

sure that the space, between the bottom of the

appliance and the upper drawer, is sufficient for air

circulation.

• The bottom of the appliance can get hot. Make sure

to install a non-combustile separation panel under

the appliance to prevent access to the bottom.

Electrical Connection

Warning! Risk of fire and electrical

shock.

• All electrical connections should be made by a

qualified electrician.

• The appliance must be earthed.

• Before connecting the hob to an oven and before

every wiring make sure the main terminals of both

appliances are not live.

• Make sure that the electrical information on the

rating plate agrees with the power supply. If not,

contact an electrician.

• Make sure the appliance is installed correctly. Loose

and incorrect electricity mains cable or plug (if

applicable) can make the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable tangle.

• Make sure that a shock protection is installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if applicable)

does not touch the hot appliance or hot cookware,

when you connect the appliance to the near sockets

• Do not use multi-plug adapters and extension

cables.

• Make sure not to cause damage to the mains plug

(if applicable) or to the mains cable. Contact our

Authorised Service Centre or an electrician to

change a damaged mains cable.

• The shock protection of live and insulated parts

must be fastened in such a way that it cannot be

removed without tools.

• Connect the mains plug to the mains socket only at

the end of the installation. Make sure that there is

access to the mains plug after the installation.

• If the mains socket is loose, do not connect the

mains plug.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

• Use only correct isolation devices: line protecting

cut-outs, fuses (screw type fuses removed from the

holder), earth leakage trips and contactors.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Comments to this Manuals

No comments

ZANKER KEV6041FBB User Manual Page 11

Comments to this Manuals

Related products and manuals for Hobs ZANKER KEV6041FBB