ZANKER KRH40GSX User Manual download pdf (Page 19)

Caution! Make sure that the bottoms of

pots do not stand above the control

knob, otherwise the flame heats the

control knob up.

Caution! Make sure that pot handles are

not above the front edge of the cooktop.

Caution! Make sure that the pots are

placed centrally on the burner in order to

get maximum stability and to get lower

gas consumption.

Diameters of cookware

Use cookware with diameters applicable

to the size of burners.

Burner Diameter of cook-

ware (mm)

Rapid 180 - 260

Semi-rapid 120 - 220

Auxiliary 80 - 160

Care and cleaning

Warning! Refer to Safety chapters.

General information

• Clean the hob after each use.

• Always use cookware with clean bottom.

• Scratches or dark stains on the surface have no

effect on how the hob operates.

• Use a special cleaner applicable for the surface of

the hob.

• Wash stainless steel parts with water, and then dry

them with a soft cloth.

Pan supports

The pan supports are not resistant to

washing in a dishwasher. They must be

washed by hand.

1. Remove the pan supports to easily clean the hob.

Be very careful when you replace

the pan supports to prevent the hob

top from damage.

2. The enamel coating occasionally can have rough

edges, so be careful when you wash the pan

supports by hand and dry them. If necessary,

remove stubborn stains with a paste cleaner.

3. After you clean the pan supports, make sure that

they are in correct positions.

4. For the burner to operate correctly, make sure that

the arms of the pan supports are aligned with the

centre of the burner.

Cleaning the hob

• Remove immediately: melted plastic, plastic foil,

and food with sugar. If not, the dirt can cause

damage to the hob.

• Remove when the hob is sufficiently cool:

limescale rings, water rings, fat stains, shiny metallic

discoloration. Clean the hob with a moist cloth and

some detergent. After cleaning, rub the hob dry with

a soft cloth.

• To clean the enamelled parts, cap and crown, wash

them with warm soapy water and dry them carefully

before you put them back.

Cleaning the spark plug

This feature is obtained through a ceramic ignition

candle with a metal electrode. Keep these components

well clean to prevent difficult lighting and check that the

burner crown holes are not obstructed.

Periodic maintenance

Speak to your local Authorised Service Centre

periodically to check the conditions of the gas supply

pipe and the pressure adjuster, if fitted.

Troubleshooting

Warning! Refer to Safety chapters.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Comments to this Manuals

No comments

ZANKER KRH40GSX User Manual Page 19

Comments to this Manuals

Related products and manuals for Hobs ZANKER KRH40GSX