ZANKER KRH40GSX User Manual download pdf (Page 20)

What to do if...

Problem Possible cause Remedy

There is no spark when you try to

activate the spark generator.

The hob is not connected to an

electrical supply or it is connected

incorrectly.

Check if the hob is correctly connec-

ted to the electrical supply.

The fuse is released. Make sure that the fuse is the cause

of the malfunction. If the fuse relea-

ses again and again, contact a

qualified electrician.

Burner cap and crown are placed in-

correctly.

Place the burner cap and crown cor-

rectly.

The flame extinguishes immediately

after ignition.

Thermocouple is not heated up suf-

ficiently.

After lightning the flame, keep the

spark generator activated for equal

or less than 10 seconds

The flame ring is uneven. Burner crown is blocked with food

residues.

Make sure that the injector is not

blocked and the burner crown is

clean.

If you cannot find a solution...

If you cannot find a solution to the problem yourself,

contact your dealer or an Authorised Service Centre.

Give the data from the rating plate. Make sure, you

operated the hob correctly. If not the servicing by a

service technician or dealer will not be free of charge,

also during the warranty period. The instructions about

the Service Centre and conditions of guarantee are in

the guarantee booklet.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

No comments

ZANKER KRH40GSX User Manual Page 20