ZANKER KWF71411WE User Manual

User manualWashing Ma-chineKWF 71411 WE

Electrical connection• The appliance must be earthed.• Make sure that the electrical information on the rat-ing plate agree with your domestic power s

Before Loading The LaundryImportant! Make surethat no metal objects areleft in the laundry (e.g.hair clips, safety pins,pins). Button up pillowca-ses,

Detergents and additivesGood washing results also depend on the choice of de-tergent and use of the correct quantities to avoid wasteand protect the e

• Rotate the flap up-wards. Ensure to fitthe flap completely in.• Carefully put the draw-er back.• Measure out the de-tergent.• Pour the powder de-ter

1 2 3 4 5 6 791081Programme selector dial Turn the programme selector dial to the required programme. Theselector dial can be turned either clockwise

3Spin Reduction By selecting a programme, the appliance proposes automatically themaximum spin speed provided for that programme.Press this button rep

7Display7.17.27.3The display shows the following information:7.1 Delay Start icon7.2 Child safety lockThis device permits you to leave the appliance u

You can cancel or modify the delay time at any moment, before youpress button 9.Selecting the delay start :• Select the programme and the required

10Door light The pilot light 10 illuminates when the programme starts and indicates ifthe door can be opened:• light on: the door cannot be opened. Th

Programme - Maximum and Minimum Temperature - CycleDescription - Maximum Spin Speed - Maximum Fabrics Load- Type of LaundryOptionsDetergent Com-partme

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Frost precaution _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4Environment concerns _ _ _ _

Programme - Maximum and Minimum Temperature - CycleDescription - Maximum Spin Speed - Maximum Fabrics Load- Type of LaundryOptionsDetergent Com-partme

Programme - Maximum and Minimum Temperature - CycleDescription - Maximum Spin Speed - Maximum Fabrics Load- Type of LaundryOptionsDetergent Com-partme

Programmes Load(kg)Energy con-sumption (kWh)Water consump-tion (litre)Approximateprogramme du-ration (minutes)Remainingmoisture (%)1)Delicates 40 °C 3

• Use a stiff brush to clean and remove all washingpowder residue.• Clean all the removed parts of the dispenser draw-er under a tap to remove any tra

• close the filter cover;• insert the mains plugagain.Cleaning the water inlet filtersImportant! If the appliance doesn't fill, it takes a longti

Fault code and malfunc-tionPossible cause / SolutionProblem with the watersupplyThe water tap is closed.• Open the water tap.The inlet hose is squashe

Malfunction Possible cause / SolutionThe appliance does notstart:The plug is not properly inserted in the power socket.• Insert the plug into the powe

Malfunction Possible cause / SolutionThe appliance vibratesnoisily:The transit bolts and packing have not been removed.• Check the correct installatio

Mod. ... ... ...Prod. No. ... ... ... Ser. No. ... ... ...Mod. ... ... ...Prod. No. ... ... .. Ser. No. ... ... ...M

29

• After having installed the appliance, check that it isnot standing on the inlet and drain hose and theworktop is not pressing the electrical supply

30

31

www.electrolux.com/shop 192986751-A-122012

To activate this device,rotate the button (withoutpressing it) inside thedoor clockwise until thegroove is horizontal. Ifnecessary use a coin.To disab

>PE<=polyethylene>PS<=polystyrene>PP<=polypropyleneThis means that they can be recycled by disposing ofthem properly in appropriate

Water supply pressure MinimumMaximum0,05 MPa0,8 MPaMaximum Load Cotton 7 kgSpin Speed Maximum 1400 rpmInstallationUnpackingWarning!• Read carefully th

• Remove the power supply cable and the draininghose from the hose holders (C) on the rear of theappliance.• Unscrew the three bolts (A) and remove th

Level the appliance by raising or lowering the feet.The appliance MUST be level and stable on a flathard floor. If necessary, check the setting with a

Tie the plastic hose guide to the tap with a string toprevent that the drain hose unhooks when the appli-ance is emptying.• Onto a sink outlet spigot.